MELO 2 Atomizer
With large liquid capacity of 4.5ml, the new MELO 2 atomizer is remarkably convenient to use, mainly featuring its simple structure and side e-liquid fill hole for ease of parts cleaning and e-liquid refilling.
When used with EC TC-Ni/EC TC-Ti head, the MELO 2 atomizer can be compatible with various temperature control devices, especially the iStick TC60W.
1× MELO 2 Mouthpiece
1× MELO 2 Atomizer Tube
1× MELO 2 Atomizer Base
1× EC Head (0.3ohm)
1× EC TC-Ni Head (0.15ohm)
1× EC TC-Ti Head (0.5ohm)
4× Sealing Ring
1× Silicone Ring
Thread Type: 510 Thread
Material: 304 Stainless Steel
1) Optional types of EC heads and EC TC head, separately supports normal VW (Variable Wattage) device and smart TC (Temperature Control) device.
|2) The side e-liquid fill hole is designed for ease of refilling e-liquid.|
|3) It comes with large liquid capacity of 4.5ml, reducing the frequency of refilling e-liquid.|
|4) The amount of airflow can easily be adjusted by rotating the flexible airflow control ring on the atomizer base so as to get different vaping experiences.|
|5) The metal mouthpiece packs with excellent characteristic of heat insulation.|
|6) All the EC series atomizer heads are applied with 100% pure cotton wick.|
|How to add liquid:
The e-liquid fill hole is located in the side of the top cap of atomizer tube. Rotate counterclockwise the regulation ring on the top cap to open the e-liquid fill hole. Then slowly refill e-liquid into the glass tube. Finally close the e-liquid fill hole by rotating clockwise the regulation ring.
|How to replace atomizer head:
1. First pull the atomizer base out of the MELO 2 atomizer;
2. Then screw off the atomizer head from the atomizer base;
3. Finally screw a new atomizer head tightly onto the atomizer base.
|Recommended match with: iStick TC60W
The best match for MELO 2 atomizer is iStick TC60W. This perfect combination will bring you a wonderful vaping experience.